Easy-Life AquaMaker - Water conditioner
Delivery in 3–5 working days from our Swiss warehouse
Description
Easy-Life AquaMaker is a powerful, fast working water conditioner.
It makes aggressive tap water immediately suitable for all freshwater and marine aquariums. AquaMaker can also be used in reef aquariums and garden ponds. It is absolutely safe for all fish, plants, corals, shrimps, snails and the biological filter.
AquaMaker has no impact on the pH, KH or GH. Furthermore, AquaMaker will not overactivate skimmers in marine aquariums.
Content 1 piece
Use
AquaMaker is best added to the tap water used for the water change. Only use the dose for the volume of this new tap water. Thus, aggressive substances are immediately neutralized.
AquaMaker can of course also be added directly to the aquarium. In this case, base the dosage on the total volume of the aquarium water.
Dosage
The standard dosage is 10 ml AquaMaker per 50 liters of aquarium water. Or: The standard dosage is 1 US fl oz AquaMaker per 40 US Gallons of aquarium water.
Shake before use. The product may release a sulfur odor.
Example: dosing to tap water for water change
Five buckets of each 10 liters are filled to change water. Dose 2 ml of AquaMaker in each bucket and mix it. The mixture can be added to the aquarium right away, because AquaMaker works instantly.
Example: dosing to an aquarium
An aquarium has a water volume of 100 liters and 20 liters of water is changed. The dosage of AquaMaker is for the full water content, in this case 100 liters. The addition to the aquarium water should be 20 ml of AquaMaker.
Deviating dosages – concentrations of chloramine, chlorine and nitrite & water temperature
* use a half dose of AquaMaker (5 ml per 50 liters; 1 US fl oz per 80 US Gallons) at low concentrations of chlorine, chloramine or ammonia
* use a double dose of AquaMaker (20 ml per 50 liters; 2 US fl oz per 40 US Gallons) at higher concentrations of chlorine, chloramine of ammonia
* emergency: use a triple dose of AquaMaker (30 ml per 50 liter; 3 US fl oz per 40 US Gallons) at very high nitrite concentrations (3 mg/L or higher) or at very high ammonia concentrations (1 mg/L or higher)
* use up to half a dose of AquaMaker (maximum) as soon as the water temperature reaches 30 ºC (= 86 ºF)
AquaMaker is ideally added to the tap water used for water changes. In this case, only use the dosage prescribed for the volume of the newly added tap water. In this way, aggressive substances are neutralised immediately.
AquaMaker can of course also be added directly to the aquarium water. In this case, the total volume of the aquarium water must be used as the basis for dosing.
Dosage
The standard dosage is 10 ml per 50 litres of aquarium water. Shake before use. The product may have a sulphur odour.
